BTA2024 award-winning products announced

Canuck Planning launches safety device to prevent buses from being left behind, which is eligible for a subsidy that conforms to MLIT guidelines.

- The following is content from the press release -

(Katsushika-ku, Tokyo; President: Koichiro Kaneko; Capital: 10 million yen) will release on April 25 the "Bus Leave-Away Prevention Safety Device Mietsukita BA-001," an effective countermeasure against leaving passengers behind on buses. Priced at 77,000 yen (8m/12m connection cable type) and 88,000 yen (20m connection cable type) including tax. The BA-001 is a subsidy-eligible product that conforms to MLIT guidelines and has been certified by the Ministry of Land, Infrastructure, Transport and Tourism.

In response to the serious problem of children being left unattended on shuttle buses, our company, which has been planning and developing in-vehicle products for about 40 years, has developed a safety device to prevent children from being left unattended in vehicles. This product "Mi-tsukita" consists of a main unit, an alarm unit, and a display unit, and is easy to install and simple to operate because all you have to do is connect these units with the included connecting cable.

Image after installation: Main unit
Image after installation: Alarm unit
Image after installation: Display unit

When the engine is stopped (key off), the alarm unit installed at the rear end of the bus will begin to sound an alarm. The driver moves to the rear of the bus while checking for the presence of the passengers (children), and presses the button on the alarm unit installed at the end of the bus to stop the alarm.

The system is easy for anyone to understand, with only a simple operation to press the alarm sound release button and no complicated operation. If the driver does not confirm the presence or absence of the child, the alarm will sound louder in stages to avoid startling the child, and after 10 minutes, it will switch from an alarm tone to a vehicle horn tone to alert others of the possibility of being left behind.

Just confirm your drop-off and press the button.

Power is supplied from the vehicle battery. The system also comes with a sticker that can be attached to the outside of the vehicle to embody, visualize, and demonstrate that the company is engaged in accident prevention activities.

The size of the weatherproof sticker is 12 cm x 12 cm

Although there is no particular maintenance required after installation, local governments have mandated thorough safety management for bus transportation, and we plan to offer plans that include on-site equipment inspections and driver training.

Inspection and training plans will also be prepared.

Normal operation can be checked by the buzzer sound at startup and the illumination of the indicator unit lamp mounted in an easily visible location on the driver's seat.

In the event of an operational error, the main unit emits a buzzer sound and the red lamp on the display unit lights up or blinks.

(which has a track record of supplying parts for the supercomputer "K computer" and its successor), and all parts are made in Japan. It can be installed on 12V and 24V vehicles, and can be retrofitted to any type of vehicle, not limited to buses. Three cable lengths (8m, 12m, and 20m) are available according to the size of the vehicle. This product offers the minimum necessary simple functions and a low price. This summer, we are planning to release a motion sensor that can add an automatic detection type function as an optional part.

Product Composition
Three types of connection cables are available: 8m, 12m, and 20m types.
Product Specifications
model numberBA-001S (cable 8m) Suggested retail price 77,000 yen (including tax) / JAN: 4985285075003
BA-001L (cable 12m) MSRP 77,000 yen (including tax) / JAN: 4985285074990
BA-001X (20m cable) MSRP 88,000 yen (including tax) / JAN: 4985285075027
Supply voltageDC 9V to 30.0V
SPL60 to 80 dB (approx. 80 dB at maximum alarm pattern)
Operating temperature range-30°C to 65°C
Average current consumptionApprox. 20mA in standby / Approx. 55mA in alarm
Unit DimensionsAlarm unit W184mm x H57.5mm x D25mm
Main unit W100mm x H65mm x D25mm
Display unit W42mm x H57mm x D26mm (housing only)
Unit WeightAlarm unit Approx. 115g
Main unit approx. 75g
Display unit Approx. 80g (including cable)
Wiring Diagram

For more information on this product, please visit the Canac Planning website.
https://kanack.co.jp/products/ba-001/

Click here to download the document
https://kanack.co.jp/download/

Product Introduction Video
https://youtu.be/2ExMbT9z2m0

Reference installation video
https://youtu.be/NqMEXhrUvFo

Kanak Kikaku Co.
Representative: Takaichiro Kaneko, President and Representative Director
1-21-4 Takasago, Katsushika-ku, Tokyo 125-0054, Japan
URL https://kanack.co.jp/

For inquiries regarding this matter, please contact
TEL 03-5660-1234 ■FAX 03-5660-1231 ■E-Mail info@kanack.co.jp
Business hours: Weekdays 9:00-12:30 13:30-17:00 (except Saturdays, Sundays, national holidays and our company holidays)
*This information is subject to change without notice. Please note that this information is subject to change without notice.